Wire Tracker,ZoeRax RJ11 RJ45 Cable Tester Line Finder Multifunction Wire Tracker Toner Ethernet LAN Network Cable Tester

Description

Wire Tracker RJ11 RJ45 Cable Toner Line Finder Multifunction Wire Tracer Ethernet LAN Network Cable Collation Telephone Line Tester Continuity Checking with RJ11 Adapter, Toolkit, eBook

Professional Wire Tracker This instrument is a multi-functional handheld cable testing tool. It has wide application with reinforced cable types and multiple functions. It is a necessary testing tool for telecommunication engineering, wire engineering and network maintenance person

Wire Tracing The capable of quickly finding the required line pairs among numerous ones. It is adaptable to network cable RJ45 terminal, telephone line RJ11 terminal, and other metal wires via the provided clip adapter

Network Cable Collation Tests physical connection status of network cable, such as open circuit, short connection, miswire and reverse connection

Line Level test, and Status of Telephone Line Test The emitter can be used to judge Line Level, Positive and Negative Polarity, TIP and RING line, and whether the telephone line is idle, ringing or off-hook

Continuity Checking This tool can check continuity of the tested wire. NOTE: The TONE and CONT indicators do not indicate the working status but the measuring result

Network Mode – Verifying Correct Wiring

1. Plug the two ends of an Ethernet cable into both the transmitter and receiver RJ45 ports, pressing test will start a test sequence. 2. Turn the transmitter function rotary knob to Network position, pressing TEST button on the transmitter will start a test sequence. 3. A correctly wired cable will sequence from 1 to 8, 1 to 8, ad infinitum. Both the transmitter and receiver should sequence in the same order for standard Ethernet. G is ground, and if a cable grounded on both ends, the G should light before starting over at 1 again. 4. According to the sequence indicators, get the network cable collation result. If there will be 2 or more indicators lights on simultaneously, the quantity of lights indicates the quantity of short circuit. If open circuit, the corresponding sequence line indictor will not light on.

TONE Mode – Testing Telephone Line Polarity or Working Status

1. Turn the transmitter function rotary knob to CONT position. The CONT LED will not light on at this time. 2. The alligator clip cable needs to be plugged into the RJ11 port, will NOT work when plugged into the RJ45 port. Connect the alligator clip cable with the test line. 3. The CONT LED will light on green if the test line is continuous. The green light will fade away as resistance increases, and will be hard to see by 220k ohms.