Practical Measurement Micrometer Carbon Steel Outside Micrometers Accessories Micrometer Gauge Meter Accurate Measuring Tool

Description

Practical Measurement Micrometer Carbon Steel Micrometer Gauge Meter Precise Tools Accessories Accurate Measuring Tool

Specification:

Material: carbon steel

Measuring range: 25

Resolution: 0.001

Scope of application: 25

Specifications: Micrometer 0-25

Feature:

Outer diameter micrometer the external
dimensions measuring instruments, measure the distance between the two sides of
the square frame by use of helix principle. Outer diameter micrometer is mainly
used for measuring a variety of external dimensions.

Diameter micrometer dividing value is
0.01mm, the upper limit of measurement range is not more than 300mm, divided
into a 25mm per specification. Such as 0-25mm, 25-50mm …… and so on.

Diameter micrometer form shown in the
picture: The picture is for illustration only, does not indicate the detailed
structure.

Instructions for use:

1. Clean the measuring surface before use
and correct the zero position. 0-25mm direct alignment zero: 25mm above use the
bar gauge aimed at quasi-zero.

2. Zero correction method: If the 0-bit
line is not aligned with the baseline, first loose screw with a screwdriver
slightly, with a wrench to adjust the baseline position, so that the baseline
alignment 0 taste bit line, then tighten the screws. See instructions for use
picture 2

3. When measuring, the micrometer should be
perpendicular to the work piece under test, rotating force measuring device,
the measuring surface in contact with the work piece should be rotating gently,
when the force measuring device issued a slight click, click …
sound, That is the actual size of the work piece under test.

4. Locking device can be passive
measurement of micro-screw back and forth. Relax to the right and lock to the
left. See instructions for use Figure 3

5. When measuring, the left hand should
hold the heat shield to prevent body temperature transmitted to the micrometer,
causing measurement error.

6. One end of the wrench can be adjusted
zero, the other end can pull the force measuring device.

Warm tips:

1. Micrometer is a precision measuring
tool, when used gently, after use in the exposed parts coated with anti-rust
oil, and placed in the box, put it at the dry and ventilated place.

2. Measurement cannot force the
micro-rotation cylinder, so as not to damage the accuracy.

1 x Outside Micrometer
1 x Accessory

Drop Shipping Service.

1.There is no limited stock to fulfill the orders on a daily basis.

2.For USA/CA /RU the shipping is quickly.

3.Priority shipping,fast shipping in 48 hours.
4.No invoice or receipt or promotional materials included.

1. WORLDWIDE SHIPPING.

Except some countries and APO/FPO
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.
6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!
7. Delivery Time:

1. You have 7 days to contact us and 30 days to return it from the date received. If the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUE A REFUND OR REPLACEMENT to you. There are NO

EXCEPTIONS!
Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from PORTAL. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the products is are not as advertised.
5. 12 months Manufacturer’s limited Warranty for defective items excluding items damaged and/or misused after receipt. Accessories come with a 3-month warranty.
6. Defective items MUST BE reported and returned within the warranty period and in the original packaging, if possible. You must tell us what the defect is and give us your order number. WE DO NOT REPAIR OR REPLACE ITEMS WITH AN
EXPIRED WARRANTY.
You agree to all of the above-listed policies upon ordering on PORTAL!

We maintain high standards of excellence and strive for 100 customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them!