PEI Sheet 305/254/235/157/150/120mm for 3D Printer Build Surface Polyetherimide

Description

3D Printer PEI Sheet 305/254/235/157/150/120mm for 3D Printing Build Surface with 3m Adhesive Tape Polyetherimide Ultem Sheet
Description:
PEI polyetherimide sheets provide a 3D printed build surface, which does not require tape, paste or adhesives.

Both ABS and PLA adhere well to the surface, so there is no need to use a support raft to obtain better adhesion. The stable use temperature is 150 degrees.

Specification:

Size: 305x305mm/12.01×12.01in, 254x254mm/10x10in, 235x235mm/9.25×9.25in, 157x157mm/6.18×6.18in, 150x150mm/5.91×5.91in, 120x120mm/4.72×4.72in

Instruction:
1. Please remove the 3m backing before sticking it on the construction surface, and then remove the transparent protective film before use.
2. Once the PEI board is connected to the 3m backing, you can more easily fix it on the bottom plate.
3. It helps to wipe the surface with isopropanol, methanol or soap between prints. This will ensure that the PEI is clean and aid in bonding.
4. Light sanding with 5000 sandpaper will also make PEI boards have a longer service life.

Note:
Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
Please allow 1-3mm measuring deviation due to manual measurement.
1 x PEI Sheetwith Tape