Description
Our new Dual channel 12v/24v car charger:
New Arrival 2——12v/24v 25A
battery charger: //www.PORTAL.com/item/1005004613683788.html New Arrival 3—-36v/48v 18A
battery charger: //www.PORTAL.com/item/1005004517451535.html OUR New Arrival
—– 12v/24v 35A
battery charger: //www.PORTAL.com/item/1005004501966068.html
Note:
Please choose the plug of your countrywe have 4 choice:EU/US/AU/UK plug）
if you don’t know the plug of your country/region, please contact HTRC customer service,
or we will ship the plug according to your choice,thank you.
Q&A
Q1. What is the maximum charging current? whether can reach or not?
A1:To protect the battery, the system automatically identifies the battery voltage and selects the most appropriate current to charge the battery. When the battery voltage is low for example, the 12V battery is less than 11V, the system automatically charges the battery at the maximum current.
Q2:Does The LifePO4 battery can fully charged?
A2:There will be a callback feature after this type of battery is full, and the power is off about 1V, which is normal, please know!
Q3:Whether it exit problem when the Fan made noise?
A2:Please don't worry.it belongs normally Phenomenon when the fan of charger made a little noise.
Q3:Does the charger can remeber the previous battery type when it power up?or does it have Memory mode when it restart?
A3:The charger has a memory function and will automatically select the last mode
Features:
– Charge current switch.
-Have Memory mode after power off
-For batteries used on Battery Management SystemsBMS only.
-For charging 12V or 24V LiFePO4 batteries.
-For activation or maintenance of weak, old and idle batteries.
Used to select a mode for charging 12V or 24V Lithium batteries,
-Can not repair severely damaged batteries. Not for Lithium and LiFePO4 batteries.
-For ordinary lead-acid batteries/maintenance-free batteries
including AGM, GEL, SLA, WET, DEEP CYCLE, EFB,Calcium, etc.
Specification:
AC input: 100-240 V 50/60Hz
Output voltage :12 V / 24 V
Output current :12V20A & 24V10A
No-load output voltage :27.6V
Minimum starting voltage: >7.0V
Power and load :MAX 240W
Size :158 x90x50mm6.22 x3.54 x1.97 inches
Suit for :Lithium/LiFePO4/Lead-Acid AGM,GEL,EFB, MF, FLOODED, VRLA, SLA and Wet batteries..
What to get:
1X 20A Car Battery Charger
1x 3M Extension Power Cord
AU Plug cables' length only 80cm
1x Cable Clip
1x Manual
1x Retail Box
4 Charging Modes Can Selectable
Lithium/LiFePO4/Lead-AcidAGM,GEL,EFB, MF, FLOODED, VRLA, SLA and Wet batteries and Repair Mode
3 Levels Adjustable Current
24V/3A 15V/5A—24V/5A 12V/10A—24V/10A 12V/20A
Built-in Fooling Fan
Reviews
There are no reviews yet.