Additional information
Product Type | Wort Chillers |
---|---|
Material | Stainless Steel |
Brand Name | BrewApex |
Origin | Mainland China |
124.66 $ 116.20 $
7983 in stock
Product Type | Wort Chillers |
---|---|
Material | Stainless Steel |
Brand Name | BrewApex |
Origin | Mainland China |
Homebrew Beer Wort Chiller 11/20/30 Plate Heat Exchanger
The wort plate chiller is a highly-efficient device. This chiller is made of 30 plates of 304 stainless steel that have been brazed together with pure copper in an oxygen-free furnace.
Product Size:
30 Plate: 7.5 x 2.9 x 2.92191 x 73 x 74.2 mm
Heat Transfer Area/plate: 0.012m20.14ft2
Thickness of plates: 0.3 mm0.0118
Max Flow Rate: 66.6L/min17.6gpm
Design Pressure:1.0 Mpa145 psi
Test Pressure: 2.0 Mpa290 psi
Refrigeration Capacity: 1-5 KW3400-17000 BTU/hour
Estimates:
Wort in: 212 F100 C Wort out: 75 F23.9 C Water In 68 F20 C
Suggested Wort Flow: 1 Gallon/Min (3.78 L/Min)
10 Gallon Batch Cool: 10 Minutes
Water Used: 51 Gallons 189 L
Water Out: 95F35 C
Use
To use these chillers simply connect the drain of your brew kettle to the wort-in fitting of the chillers. Be sure to screen the wort as grain or hop residue can clop the chiller, and be very difficult to remove. Connect the wort-out fitting to another brewing pot or into your fermenter. Now connect a garden hose to water-in fitting and a tube to the water-out fitting to take the worm water away. You can also use a pump with cold water and recirculated it to use less water. You may need to adjust the flow rate of the water and/or wort until you achieve your desired end temperature.
Cleaning
Flush the wort side of the chiller out immediately after use. Soak the chiller in sanitizer and throughly rinse the wort-side out with clean water. Allow the chiller to air dry between uses. You can also boil the chiller to clean an sanitize it.
Type A
Type A
Type A
Type A
Type A
Type A
Type A
Type A
Type A
YES, WE COMBINE SHIPPING!
If you have any question on the shipping cost, please feel free to contact us by Aliexpress Email before you purchase items.
PAYMENT
We accept Escrow only. Credit Card is easy to make the payment on Escrow. Shipping and billing addresses must match. Payment should be sent within 5 days after auction end. Otherwise items will be relist and unpaid case will consider.
We always ship the items within 5 business daysSaturday & Holiday not included upon receipt of payment.Items will be shipped by register air mail with tracking number.
It takes about 15-20 business days to ship US, Canada, United Kingdom, Australia and Japan 20-30 business days to other countries.6-8 weeks to ship Brazil, Spain, Italy or other countries to other countries no specified.
SHIPPING
Shipping time maybe influenced by Customs delay, holiday,events or other uncertainties. We couldn't guarantee the arrival time. Make sure you are agree with the delivery time before purchasing. If you would like to choose any other faster Expressed, please contact me before purchasing.
FEEDBACK
We are committed to your Postive Feedback after receiving your payment.If for ANY REASON you do not feel we have earned Postive Feedback, please feel free to contact us by Aliexpress Email, We will communicate as quickly as possible to resolve ANY issue. We will leave positive feedback for all purchases and appreciate you sharing your excellent experience with other AliExpressers!
GUARANTEE
We guarantee that all item descriptions are accurate. In the event that an item is defective or you received the wrong item, contact us via Aliexpress Email. We will be happy to resolve any problem as quickly as possible.
RETURNS
Returns or exchanges are accepted on most UNUSED items within 14 days of receipt, but customer hav eto pay the extra shipping cost. Please contact us before you return the items.
Please Note
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility. Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight shipping company or when you pick the item up – do not confuse them for additional shipping charges.
FAQ
1 Q:
How do I pay for my shopping?
A: We accept Escrow only. Credit Card is easy to make the payment on Escrow.
2 Q:
Does the items shipping with the tracking number?
A: Yes, all the items ia shipping with the tracking number in every order, and you can see the shipment status on the corresponding website.
3 Q:
When I want to bulking buying, how much of the wholesale price?
A: When customer want to bulk buying, please feel free to contact us by Aliexpress Email, we will give you best pice.
4 Q:
I need some similar products, but I cannot find out in your store,can you provide that
?
A: Yes, you can send the picture to us. We will try our best to find out and reply the price to you. Also we accept customized product. Please vist our wholesale website
www.fcpmcl.
com for many other items.
304 Stainless Steel Quick Disconnect We offer the largest variety of standarder and unique quick disconnects to the home and craft brewing markets. They come standard with replaceable food grade silicone o-rings. Our Quick Disconects are made from 304 stainelss steel with high temperature silicone seals. The male part of the QD set has a full 1/2ID. The only aress of restriction are on the back side of fitting such as on the 1/2 hose barb. The quick disconnect will hold pressure for brewing applications when moving liquids at 60 psi or less. All our male Quick Disconects are compatiable [...]
Inline Filter for Home Brewing 150 micron 100 mesh Features: 1. Perfect for large batches and dry hopped beers 2. Removes sediment 3. No Taste-spoiling aeration or chemicals 4. Save time and beer 5. No pump required 6. Easy to clean 7. Include 2 hose barbs 8. 1/212mm hose barb, 3/89mmhose barb, 1/46mmhose barb available. Dimension: Screen: 150 micron / 100 mesh Max Operating Temperature: 65C/150F Max Operating Pressure: up [...]
13.735cm length 304SS Spring Loaded Beer Bottle Filler + Nylon Cleaning brush Feature: 1. Made of food grade 304 stainless steel 2. Highly corrosion-resistant interior and exterior, ideal for wet gases 3. Cylinders perform well at low temperatures 4. Easy to clean and sanitize 5. Spring loaded tip for easy filling 6. Fills bottles form bottom up YES, WE COMBINE SHIPPING! If you have any question on the shipping cost, please feel free to contact us by Aliexpress Email before you purchase items. PAYMENT: We accept Escrow only. Credit Card is easy to make the payment on Escrow. Shipping [...]
Homebrew Beer Wort Chiller 30 Plate Heat Exchanger B3-12A The wort plate chiller is a This chiller is made of 30 plates of 304 stainless steel that have been brazed together with pure copper in an oxygen-free furnace. Product Size: 30 Plate: 7.5 x 2.9 x 2.92191 x 73 x 74.2 mm Heat Transfer Area/plate: 0.012m20.14ft2 Thickness of plates: 0.3 mm0.0118 Max Flow Rate: 66.6L/min17.6gpm Design Pressure:1.0 Mpa145 psi Test Pressure: 2.0 Mpa290 psi Refrigeration Capacity: 1-5 KW3400-17000 BTU/hour Estimates: Wort in: 212 F100 C Wort out: 75 F23.9 C Water In 68 F20 C Suggested Wort Flow: [...]
Stainless Steel Coil for Jockey Box 50ft/15.3m Length This Jockey Box Coil is made with 50 feet of 5/16 OD, 304 Stainless Steel. You made and kegged your homebrew, so now make your jockey box so that you may enjoy a delicious cold draft beer at your next picnic or family gathering. This coil comes with two female G 5/8 ends allowing you to easily hook up to a standard beer shank. No need hext nuts, ferrules, and grommets! It can be used [...]
Magnetic Drive Pump 32 Watt MP-20RM The magnetic drive pump is a perfect pump for your brew system. Use it to move hot wort in an All-Grain system and also to transfer wort from boil kettle to fermenter. This pump is not self priming so do not run the pump dry. Feature: 1. The pump is with stainelss steal head 2. Inlet and outlet are 1/2 Male NPT 3. Max Capacity: 27 ~ 32 L/min 4. Max Head: 3.1 ~ 4.3 Meter; Rated Head: 1.5 Meter 5. Speed: 2600~3000 rpm 6. Output: 32w 7. Has mounting bracket on bottom of pump Note: Magnetic pumps require [...]
Specifications: Material: Stainless steel 9.52mm X 0.5mm X 7.8m 9.52mm X 0.5mm X 8m 9.52mm X 0.5mm X 15m 9.52mm X 0.5mm X 15mdouble layer Features: - This wort chiller is used for cooling beer or malt. - Complete disinfection can be achieved after 15 minutes wort boiling. - This cool the cooked wort quickly. Let the wort reach your preferred temperature for Yeast inoculation . Water adaptor installation: 1.First unscrew the filter of the basin faucet. 2.Use the PTFE Thread Seal Tape to bind in the copper connections thread. 3.Screw in the Basin faucet. 4.Then screw the connector [...]
Features: 100 Brand New. This filter is designed for homemade brew, which can hold hop to reduce impurities and enhance filtration level of fermentation broth, so as to ensure purer taste and aroma. Stainless steel mesh for 300 micron fine filtration. With hook for hanging, very convenient to use. Features: The filter is made of stainless steel, safe, corrosion resistant and easy to clean. Features acid and alkali resistant, anti corrosion and long lifespan. 300 micron stainless steel mesh ensures purer taste of the drinking. The filter can be used to contain hops when boiling wort, helping to reduce [...]
Product Description Stainless Steel Alcohol Distiller This alcohol distiller moonshine still adopts high-quality and hygienic stainless steel, featuring argon welding techniques. It comes with a large fermentation tank allowing for a high capacity of 20/30/50/70L and advanced cooling devices for excellent performance in the alcohol brewing and steaming process. It is widely applied in both commercial places and households by its distinctive features and convenience. x Since our 70L alcohol distiller has been upgraded & updated, the product in new or old appearance will be delivered randomly. 20/30/50/70 L Stainless Steel Fermenter Excellent Impurity Filtration Efficient Condensation Treatment [...]
Product Description: Nukataps new isobaric filler fills the bottle directly from the head without affecting the flavor, aroma or carbonation of the cask beer. It is made of stainless steel and contains no aluminum or brass parts. This allows you to use SS or PBW to clean this accessory without damaging it. We also offer other accessories so you can also connect your beer line to the device for other filling methods. To use the device, simply connect the CO2 gas line to the filling unit. The integrated back pressure relief valve gives you fine control over the back [...]
Product Description Digital Liquid Filling Machine Drip-Leakage Nozzle & 5-3500 ml Quantitative Filling & Microcomputer Control This numerical control liquid filling machine uses a micro-computer to control the mini-pump on filling time and the rotation rate of the electric motor so that the device can fill the liquid fluently and at high accuracy. The machine has a self-prime pump that can suck in the liquid from your container and then output via the nozzle. It can be used to fill many different types of clear thin liquid, including water, olive oil, drinks, vinegar, milk, etc. Note: Different fluid needs to [...]
brewing siphon hose wine beer making tool Home brewing food grade materials selling Hand Hop Knead Siphon Filter Brewing Tools Description: Features: 1. Made of high quality plastic material, non-toxic and tasteless. 2. Can be used for enzyme, filtering, extracting, bottling, step in place. 3. Flow fast, easy to grasp, great for pouring, transfer wine, bottling etc. 4. Very easy to use, ready to siphon sterile filter, the siphon tube inserted into the filter liquor filter, pinch hard plastic soft ball, let go wine to wash over. 5. Suitable for home brewed, wine, liquor wine, white wine, yellow [...]
Product Description x This mesh filter bag is widely used for filtering soy milk, alcohol, dregs, slag, food filtration. •Dimension: we provide you various sizes for choosing to meet your needs well, please carefully check the picture for details before buying• Quality material: these bags are made of cotton, soft, corrosion resistance, high temperature resistance,durable and have fine workmanship, washable, allow you to use for many times, thus can last for a long time• Easy for sealing: these bags have drawstrings, easy and convenient to seal, good for soup cooking, tea making, coffee filtering, etc., very useful in [...]
43.36 $ Add to cart304 Stainless Steel Quick Disconnect We offer the largest variety of standarder and unique quick disconnects to the home and craft brewing markets. They come standard with replaceable food grade silicone o-rings. Our Quick Disconects are made from 304 stainelss steel with high temperature silicone seals. The male part of the QD set has a full 1/2ID. The only aress of restriction are on the back side of fitting such as on the 1/2 hose barb. The quick disconnect will hold pressure for brewing applications when moving liquids at 60 psi or less. All our male Quick Disconects are compatiable [...]
Chcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.