Emergency start power car battery fire on the electric treasure 12V vehicle emergency starter

Description

Specifications:
For Car Motorcycle
Material:plastic shell
Size:L×W×H: 150×85×62mm
Voltage: 12V

Types of batteries: Most types of lead acid batteries including Calcium, GEL and AGM, Wet,EFB, etc..
Voltage detection: Yes
Switchmode technology: Yes
Polarity protection: Yes
Output short protection: Yes
Non battery link protection: Yes
Over voltage protection: Yes
Over temperature protection: Yes
Cooling: Fan
Input voltage: AC 110-220V, 50-60Hz
Minimum start voltage: 8.0V
Battery range: 4-100Ah
Thermal protect: 65'C+/-5'C
Efficiency: App. 85.
Compliant standards: CE,FCC,ROHS,CMA

Features:
– Microprocessor controlled
– Professional automatic switch mode
– For charging AGM,GEL,SLA and Wet batteries
– LCD display&pulse repair charge

– Overheat,overcharge,short circuit & reverse polarity protection
– Maximizes battery life

Package includes:
1 x 12V 6A Intelligent Charger
1 x Manual

Note:

– Purchase please select the same polarity consistent socket,charger

– This charger please for indoor,beware of rain

– This charger is for battery capacity between 4AH to 100AH

– Please check the capacity AH of your battery before buying the charger! Thanks!

– Do not be carried with the vehicle,prevent shock.

High-quality life tool factory Store
smare pilse pepair charger

1.LCD screen 2.voltage detect 3.pulse repair

4.temp detect 5.multiple protection 6.auto close

Suitable for 12V Lead-Acid barrety/start-stop/ battery/dry water battery

Accurate switching og touch keys

New design buttons,refuse to freeze

Quick start >>>mode mode selection

HEAT
DISSIPATION SILENT FAN
Large Grid Vent Design Has Good Heat Dissipation Effect

High Performance Silent Fan
Chargers Works Continuously Without Heating
Greatly Extend The Service Life Of The Charger

ONE BUTTON
REPAIR ACTIVATED BATTERY
Solve Battery Power Deficit, Charging, Large Internal Resistance
And Other Problems Using High And Low Frequency Pulse
Technology, Let Your Battery Look Brand-New.

Using High And Low Frequency Pulse Repair Technology,
For Under-Voltage Batteries, Batteries That Have Been Idle
For A Long Time,And Batteries That Cannot Be Charged, It
Has A Good Repair And Activation Effect, Which Can Greatly
Make Your Batteries Look Brand-New

Intelligent chip Automatic stop
Multiple protection, use safety
Overheating protection
Low voltage protection
Overcurrent protection
Short circuit protection
Connection protection
Stop automatic

12V Battery Charging Display
STEP 1
The Red Clamp Holds The Positive Pole
The Black Clamp Holds The Negative Pole

STEP 2
Plug In 220V Power Sourc
And Start Charging

The microcomputer automatically recognizes the ambient and gives you the appropriate charging voltage for the battery according to the season.

Above 26 °C
Will Automatically Enter Summer Mode
Below 10 °C
It Will Automatically Enter Winter Mode
Note: The Temperature Will Be Automatically Detected

The use of national standard copper wire can ensure a stable current output long time charging, wire no heating long service life.
FULLY WRAPPED HIGH GUIDE CLIP

Specifications

Rated power KW: 100
Reliable running time H: 15
Output voltage V: 18
Input voltage V: 220

Easy four steps instant second start

Tips:

In order to start your car successfully, please ensure that the power supply of the car is more than 75 each time.

The first step: Connect the red clip of the car battery to the positive terminal of the car battery. Do not reverse the battery clip to the positive and negative terminals of the car battery. If the joint of the positive and negative terminals of the old battery is seriously oxidized, scrape the oxidation layer before clamping.

The second step: Connect the black clip of the car battery to the negative terminal of the car battery do not reverse the battery clip and the positive and negative terminal of the car battery. If the positive and negative joint of the old battery is seriously oxidized, first scrape the oxidation layer and then clamp it up.

Step 3: Make sure the emergency power supply is turned off. Red clip to the positive terminal of the car battery to ensure that the DO port is fully plugged into the end of the connection, and then turn on the emergency power switch silver triangle.

Step 4: First unplug the DO connector and then remove the battery clip. Remove the boot power supply within 30 seconds after successful startup.When taking the starting power supply, first pull out the blue DO connector and then remove the battery clip from the car battery.