Additional information
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
Internetowy sklep tanio
41.56 $
3000 in stock
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
Feature:
Charge protection, prevent the battery overcharge and overdischarge, and automatically control the charging current, better protect the battery.
Type-C female base interface, reserved with input voltage welding electricity, convenient for DIY.
Specification:
Input voltage: 4.5V-5V
Maximum charging current: 1000mA
Charging cut-off voltage: 4.2V+-1
Battery overdischarge protection voltage: 2.5V /3A
Board size: 2.8cm x 1.7cm/1.1 x 0.66
Package weight: 3g
Operation Manual:
1. Type-c female base and the power input end of + ~ welding pad position next to it, connect to 5V input voltage.
2. B+ is connected to the positive electrode of lithium battery, and B~ is connected to the negative electrode of lithium battery. OUT+ OUT connect loads, such as set-up board.
3. Connect the battery to B+ B-, insert the phone charger to USB, the blue light is on, indicating that there is a power supply, the red light flashes, indicating that it is charging. When the charge is full, the red light stops flashing and turns into a regular light.
4. OUT+ OUT- terminated can be load. After load on, the red light is always on. When there is a power supply at the input end, obtain current from the output end of the power supply. If there is no power supply, obtain current from the battery. When the battery voltage is lower than 2.5v, automatically close the output.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
5 X TP4056 1A Lithium Battery Charger Modules
85-240V 10A Dual AC Power Supply Automatic Switching Controller Module Board for dual AC power automatic switching module. The module can automatically switch between the two power sources.Feature:1. AC power2. Dual power input3. Automatic power switch4. Main power YX-Q01Main power supply voltage: 85V~240V ACBackup power supply voltage: 85V~240V ACLoad current: 10A MAXWorking temperature: -25℃~+85℃Working humidity: 5~95 RHSize: 70 x 48 x 18.5mmTip:1. When the main power supply is out of power, the module automatically switches to the backup power supply; when the main power supply is restored, the module automatically switches to the main power supply.2. At [...]
47.26 $ Add to cartIf you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day! ! Welcome to my shop. If you have any problems, please contact me and I will try my best to satisfy you. We specialize in T-con boards and other electronic products. We have our own factory and a large number of T-con boards and power boards for sale. Please contact me what model you want [...]
83.05 $ Add to cartSupport Dropshipping and Wholesaling. 100 Original and Good Quality with Free After-sale Warranty. 1. It's high Amp item, and the device needs certified and professional electrician for wiring.2.The frequency of the wireless router is 2.4GHz.3. The meter requires the measured device must have neutral wire. otherwise it can't measure the device's voltage, current, and power.Material: plasticcolour: As shownPackage Contents:1 x 3 Phase WiFi Energy KWH Meter80A/1 x 3 Phase WiFi Energy KWH Meter120AOnly the above package content, other products are not included.Note: Light reflection and different displays may cause the color of the item in the picture a [...]
135.00 $ Add to cartThis amplifier board using ADI's class-D amplifier SSM3302, plus DSP ADAU1701 for EQ, crossover, limit, volume control etc. the optional boards are: 4 x 10W SSM3302 x 2 2 x 20W SSM3302 x 2 IN MONO 4 x 25W SSM3582 x 2 All board support analog in besides Bluetooth in mode also. There is a volume controller on the board, you can change the whole input volume. The output mode/EQ/crossover setting can be customized as you liked, please let me know if you want. The default setting is just 2ch in and copied to 4 ch out, my default EQ [...]
108.91 $ Add to cartmost hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
64.20 $ Add to cartDimension Long 65mmx wide 40mmx 25mm high Features The circuit is simple,safe and reliable. Operating voltage AC 12-16V, suggest to use an independent power supply for it. Sampling delay of 3-5 seconds of 1.2V DC Sampling 3-5 seconds delay. Package included 1 x Speaker protection board DIY Components kit for Stereo This products include all components and PCB as the [...]
45.04 $ Add to cartmost hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
61.24 $ Add to cartHDMI To I2S Receiver IIS To HDMI Transmit Signal Conversion Board DAC Decoder Description: It adopts four-channel CMOD circulation differential line receiver driver, which is designed for applications that require ultra-low power consumption and high data rate. The device uses low-voltage differential signaling LVDS technology and supports data rates in excess of 400Mbps 200MHz. Notice: 1. The HDMI to I2S receiver board cannot be used for the HDMI interface output of Blu-ray players, etc.; 2. The I2S to HDMI transmit board cannot be used for the HDMI interface input of power amplifiers, TVs, etc. Packing List: 1pcs x Module [...]
55.26 $ Add to cartProgrammable Eight Decade Resistor Board 1R-9999999R Step Accuracy 0.1R 1/2 Watt SMD Resistance Module Description: This is resistance substitution box good low-cost alternative solution with good accuracy, wide range and 0.1R step accuracy. for educational experiments, electronic engineering design or test trimming are excellent applications. Can flexible and quick setting resistance range from 1R to 9999999R or 0.1-9.9999999MR 0-10MS . Feature: Design based on resistors series theorem. 1/2 watt tolerance +/-1 SMD resistors. High quality FR4 glass fiber PCB. With spare parts 8 pieces jumper caps Specification: Programmable Resistance: 0 to 9,999,999 ohm, [...]
42.54 $ Add to cartSmall volume DC-DC synchronous rectifier step-down module Application fields: DIY mobile power supply, vehicle power supply, communication equipment power supply, various occasions with strict requirements on volume and weight such as aviation model, etc.. Technical parameters: Model name Mini360 Ultra small volume DC-DC synchronous rectifier step-down module Module properties Non isolated Depressurization Rectification mode Synchronous rectification input voltage 4.75V-23V output voltage 1.0V-17V Output current Peak 3a, long time 1.8A conversion efficiency 96 high switching frequency 340KHz Output ripple 30mV when no load Load adjustment rate ± 0.5 Voltage adjustment rate± 2.5 working temperature-40 ° C to +85 ° C [...]
43.50 $ Add to cartT-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Introduce: T-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Version, change GPS / LoRa chip and LoRa antenna based on T-Beam V1.1. LoRa chip using Semtech SX1262 LoRa RF transceiver chip design, works in the 868/915MHz ISM frequency band, integrates a highly stable TCXO 32MHz crystal oscillator, half-duplex transceiver module, power up to +22dBm, to -139dBm receiving sensitivity. The LoRa antenna interface is changed from SMA to IPEX , which is more convenient to store. GPS chip using Semtech NEO-M8N GNSS chip design, also support GPS Beidou GLONASS, stronger positioning signal, The [...]
124.33 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.