Additional information
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
Sklep online tanie
41.51 $
6000 in stock
Dimensions (WxHxD)) | / |
---|---|
Weight | / |
Model Number | / |
Compatible Audio & Video Equipment Style | Amplifier |
Origin | Mainland China |
Certification | NONE |
Feature:
Charge protection, prevent the battery overcharge and overdischarge, and automatically control the charging current, better protect the battery.
Type-C female base interface, reserved with input voltage welding electricity, convenient for DIY.
Specification:
Input voltage: 4.5V-5V
Maximum charging current: 1000mA
Charging cut-off voltage: 4.2V+-1
Battery overdischarge protection voltage: 2.5V /3A
Board size: 2.8cm x 1.7cm/1.1 x 0.66
Package weight: 3g
Operation Manual:
1. Type-c female base and the power input end of + ~ welding pad position next to it, connect to 5V input voltage.
2. B+ is connected to the positive electrode of lithium battery, and B~ is connected to the negative electrode of lithium battery. OUT+ OUT connect loads, such as set-up board.
3. Connect the battery to B+ B-, insert the phone charger to USB, the blue light is on, indicating that there is a power supply, the red light flashes, indicating that it is charging. When the charge is full, the red light stops flashing and turns into a regular light.
4. OUT+ OUT- terminated can be load. After load on, the red light is always on. When there is a power supply at the input end, obtain current from the output end of the power supply. If there is no power supply, obtain current from the battery. When the battery voltage is lower than 2.5v, automatically close the output.
Note:
Please allow 1-3mm differs due to manual measurement.
Due to the different display and different light, the picture may not show the actual color of the item. Thanks for your understanding.
5 X TP4056 1A Lithium Battery Charger Modules
1. WORLDWIDE SHIPPING. Except some countries and APO/FPO
2. Orders processed timely after the payment verification.
3. We only ship to confirmed order addresses. Your order address MUST MATCH your Shipping address.
4. The images shown are not the actual item and are for your reference only.
5. SERVICE TRANSIT TIME is provided by the carrier and excludes weekends and holidays. Transit time may vary, particularly during the holiday season.
6. If you have not received your order after 30 days from payment, please contact us. We will trace your order and get back to you asap. Our goal is customer satisfaction!
7. Delivery Time:
1. You have 7 days to contact us and 30 days to return it from the date received. If
the item is in your possession more than 7 days, it will be considered used and WE WILL NOT ISSUE A REFUND OR REPLACEMENT to you. There are NO EXCEPTIONS!
Shipping cost is bear by both seller and buyer in half.
2. All returned items MUST BE in the original packaging and you MUST PROVIDE us with the shipping tracking number, specific reason for the return, and your order ID.
3. We will refund YOUR FULL WINNING BID AMOUNT, upon receipt of the item in its original condition and packaging with all components and accessories included, AFTER BOTH Buyer and Seller cancel the transaction from PORTAL. OR, you may choose to have a replacement.
4. We will bear all the shipping cost if the products is are not as advertised.
Defective items MUST BE reported and returned with original packaging, if possible. You must tell us what the defect is and give us your order number.
You agree to all of the above-listed policies upon ordering on PORTAL!
We maintain high standards of excellence and strive for 100 customer satisfaction! Feedback is very important. We request that you contact us immediately BEFORE you give us neutral or negative feedback, so that we can perform up your satisfaction.
It is impossible to address issues if we do not know about them!
Product Name: 12V 24V DC Motor Controller Relay Board Forward Reverse Control Limit Start Stop Switch Pusher Electric Curtain Automatic DoorWiring Reference Diagram: General wiring:Wiring Diagram 1: Two position switch reciprocatingmoving backward and forward in a straight line. Wiring Diagram 2: Positive and negative start independently, each time running a single passWiring Diagram 3: Every time you start, run a forward and reverse rotation Product Included:1pcs DC motor forward and reverse controller Product parameters: 1 Working voltage: DC 12V 12V version or 24V 24V version DC power supply power ≥ motor load x3;2 Applicable motor: brushed DC motor;3 Maximum load [...]
47.59 $ Add to cart5pcs 3A MINI DC-DC STEP DOWN CONVERTER VOLT REGULATOR 5V-23V TO 3.3V 6V 9V 12V 340KHz Specification: Size: 17 x 11 x 3.8mm Color: multicolor Material: electronic components Input voltage: 4.75V-23V Output voltage: 1V-17V Output current: 3A peak, 1.8A for long time Transfer efficiency: 96 MAX. Switching freqnency: 340KHz Output ripple: 30mV no-load Load regulation: ±0.5 Voltage regulation: ±2.5 Working temperature: -40~85℃ Package list: 1/5/10 x DC -DC power supply module Features: 1. Efficiency: Up to 96 depends on the difference between input and output voltage This module uses synchronous rectification, efficient power conversion available. 2. Good performance: Use [...]
43.18 $ Add to cartCompatible Audio & Video Equipment Style: Amplifier Model Number: T-Impulse Wristband MCU: S76G LoRa Frequency Band: LoRa 868MHZ T-Impulse S76G 868MHZ Bracelet: K133 Colour: black Material: plastic+metal Package Contents: 1 x T-Impulse S76G Bracelet 868MHZ 1 x TYPE-C Line Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the [...]
99.50 $ Add to cart4295 Description This antenna is a dual-frequency antenna. I use it on my WiFi deauther OLED application. I find ESP8266 Mini D1+antenna works much better than ESP-12E/F. So I decide to use ESP-07+this antenna for all my projects. Product specifications 4900~5900MHz S.W.R.:<=1.8 Antenna Gain: 8dbi Radiation: Omnidirectional antenna Polarization: Linear Impedance:50R PCB size: 95mm13.5mm0.55mm Wire distance: 15cm Connector: IPEX Packing List: 1Pc IPEX 8dBi Antenna for ESP8266 Mini D1 [...]
42.18 $ Add to cartProduct Name: 7CH DC 12V RS485 NTC Thermistor Temperature Sensor Modbus Rtu Remote acquisition monitor Module B3950 10K 1 Packing list: 1 pcs NT18B07 7CH RS485 NTC Temperature sensor Board Description : 1: Operating Voltage : DC 6-24VDC 7.5V 9V 12V 15V 24V2: Operating Current :7-15MA3: MODBUS RTU Command support 03 06 function code4:Serial port baud rate: 9600 default, N, 8, 15:By modifying the 485 address, up to 247 modules can be cascaded more than 16 please use R485 repeater6:Adapted sensor: B3950 10K 1 NTC thermistor, Up to 7 NTC sensors can be connected at the same time7:Temperature [...]
51.93 $ Add to cartNew arrival :If you want to buy the finished MMDVM hotspot power bank ,please click this link The default bit error rate is less than 5, and the default offset is 0. If the bit error rate is more than 5, as long as the signal can be received, it can be corrected by offset. 1.Latest version V1.3, and the firmware is latest 2. original cystal : Original from USA Duplex variant of MMDVM_HS_Hat This PCB uses the MMDVM_HS . It has two ADF7021 onboard and allows for duplex operation with two [...]
85.70 $ Add to cartFeature:OOTDTY 1.Support Lead-acid battery and Acting Battery,voltage range:6V~60V;2.Can display voltage,percent of battery,charging for TIME at the same for TIME through LCD3.The function is very powerful,realizes the automatic charge control,the control charge for TIME, also may set up and uploads the corresponding parameter through the serial portSpecifications: Product Model:XY-L10AControl accuracy:0.1VOutput Type: Direct OutputVoltage error:±0.1VScope of application: various lithium Charge control function:By setting the volt-HI:‘UP’ the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed [...]
46.64 $ Add to cartAluminum alloy Air Compressor Pressure Valve Switch Manifold Relief Regulator Gauges 125 PSI 230 Durable and practical. Easy to install and remove.The main function of the clique is to adjust the air compressor to close and start the pressure.Users can adjust according to their actual situation.The air regulator on both sides of the copper is an exhaust clique that opens the gas when used.Right red is the safety aluminum, plasticColor: as shownRated voltage: 220vExhaust pipe: about 6MMBracket joint size: about 20MMOuter pressure relief port: about 9.5MMMaximum current: 20AWorking pressure: 5-8KG 90-120 PSISwitching pressure range: 0.5-0.8MPA 5-8BAR 90-120PSImethod: normally closedSize: [...]
67.91 $ Add to cartDC-DC 9V/12V/24V to 5V Step Down Charger Power Module 3A Output USB Car Charging Regulator Buck Voltage Board Descriptions: A switching step-down DC-DC converter module; Fixed switching frequency 150KHz, the chip has excellent linearity adjustment and load regulation, fixed output 5V. The chip integrates reliability modules such as overcurrent protection, overtemperature protection, and short circuit shutdown. Specifications: Input: 5V-36V Output: 5V/3A Conversion Efficiency: 96 Switching Frequency: 150KHz Working Temperature: -40°C-+85°C Load Capacity: Maximum Output 3A, Long-Term Work 2A Product Size: 38 X 16 X 5mm/1.5 X 0.63 X [...]
40.71 $ Add to cartDescription: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The [...]
40.74 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.