Additional information
Package | No |
---|---|
Bundle | Bundle 1 |
Dimensions (WxHxD)) | 7.9×4.2cm |
Weight | 40g |
Model Number | 85DD1AA700520 |
Compatible Audio & Video Equipment Style | as description |
Origin | Mainland China |
Certification | NONE |
Sklep online tanie
46.64 $
14 in stock
Package | No |
---|---|
Bundle | Bundle 1 |
Dimensions (WxHxD)) | 7.9×4.2cm |
Weight | 40g |
Model Number | 85DD1AA700520 |
Compatible Audio & Video Equipment Style | as description |
Origin | Mainland China |
Certification | NONE |
Feature:
OOTDTY
1.Support Lead-acid battery and Acting Battery,voltage range:6V~60V;
2.Can display voltage,percent of battery,charging for TIME at the same for TIME through LCD
3.The function is very powerful,realizes the automatic charge control,the control charge for TIME, also may set up and uploads the corresponding parameter through the serial port
Specifications:
Product Model:XY-L10A
Control voltage:DC6-60V
Control current:<10A
Control accuracy:0.1V
Output Type: Direct Output
Voltage error:±0.1V
Scope of application: various lithium batteries
一.Function description
1.Automatic Charge control function:
By setting the volt-HI:‘UP’ volt-LI:‘dn’;When the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed once
2.Charge for TIME Control Function:
How to turn on the for TIME control function?
After entering the parameter set, set the parameter op is non-zero, then turn on the for TIME control function, op default parameter is:–:–h, the default does not turn on for TIME control function;
After the opening for TIME control function OP is non-zero, when the battery voltage is the lower volt-LI’dn’, the charger began to charge the battery, the system began to clock; During the timing, the battery voltage ≥ volt-HI’UP’, relay disconnect; If for TIME is up, the battery voltage is still the lower volt-LI’dn’, the relay keeps the conduction, automatically closes the charge for TIME control function, and flashes the H:ER to remind the user, the for TIME parameter setting is unreasonable; Press any for KEY to stop flashing;
Note:
for TIME format: 00:59 00 for hours, 59 for minutes The maximum for TIME is 99:59, which is 100 hours.
二.Parameter Setting
aPress and hold the SET for KEY to enter the setting interface;
bSwitch the parameters you want to set by short press SET;
cAfter the selection of parameters, can be set by the UP/DOWN for KEY to support the short press, long press fast increase or decrease; To set other parameters, repeat step b, c;
dAfter all parameters are set, long press set for KEY to exit and save;
三.The for KEY Function Description:
In the Run interface main interface:
Short press SET button to display the current set of parameters; Short press UP button, toggle display charge percentage and charging for TIME;
Short Press DOWN button, select Turn on/off relay enabling, if the relay can be closed, will show off as a reminder;
Long press UP button, switch low power state
on:No operation in 10 minutes turn off backlight
OFF: Backlight is for always bright
Long press SET button,enter the parameter settings.
四.Calculation of voltage percentage:
voltage percentage = battery voltage/volt-HI – volt-LI
五、Additional Features
aCharging for TIME recording function: not open charging for TIME control, the product will record a full for TIME, when the entry for TIME display interface, flashing display charging for TIME, and then exit for TIME display interface or next charge to open relay conduction when empty;
bAutomatic parameter detection: When the parameters are set, exit, if volt-LI dn≥ volt-HI UP, the system will flash display ERR as a reminder;
cBattery Access detection: This product attached to the battery, if not connected to the battery, the system will be shown in the downlink NbE as a reminder
Size:7.9×4.2cm/3.11×1.65inch
Note:
Please allow 1-3mm error due to manual measurement.pls make sure you do not mind before you bid.
Due to the difference between different monitors,the picture may not reflect the actual color of the item.Thank you!
Package Includes:
1x Battery Charger Control Module
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
61.24 $ Add to cartIf you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you want and I will give you the best price. [...]
47.51 $ Add to cart5pcs 3A MINI DC-DC STEP DOWN CONVERTER VOLT REGULATOR 5V-23V TO 3.3V 6V 9V 12V 340KHz Specification: Size: 17 x 11 x 3.8mm Color: multicolor Material: electronic components Input voltage: 4.75V-23V Output voltage: 1V-17V Output current: 3A peak, 1.8A for long time Transfer efficiency: 96 MAX. Switching freqnency: 340KHz Output ripple: 30mV no-load Load regulation: ±0.5 Voltage regulation: ±2.5 Working temperature: -40~85℃ Package list: 1/5/10 x DC -DC power supply module Features: 1. Efficiency: Up to 96 depends on the difference between input and output voltage This module uses synchronous rectification, efficient power conversion available. 2. Good performance: Use [...]
43.18 $ Add to cartProgrammable Eight Decade Resistor Board 1R-9999999R Step Accuracy 0.1R 1/2 Watt SMD Resistance Module Description: This is resistance substitution box good low-cost alternative solution with good accuracy, wide range and 0.1R step accuracy. for educational experiments, electronic engineering design or test trimming are excellent applications. Can flexible and quick setting resistance range from 1R to 9999999R or 0.1-9.9999999MR 0-10MS . Feature: Design based on resistors series theorem. 1/2 watt tolerance +/-1 SMD resistors. High quality FR4 glass fiber PCB. With spare parts 8 pieces jumper caps Specification: Programmable Resistance: 0 to 9,999,999 ohm, [...]
42.54 $ Add to cartProduct Name: R411b01_3v3_3pcs 3.3v Rs485 To Lvttl Rs232 Transceiver Converter Sp3485 Module For Esp8266 Raspberry Pie Breadboard Banana Pie Package inlcuded: 3 PCS R411B01_3V3 DC 3.3V RS485 to LvTTL RS232 converter Description: Read/write automatic control RS485 TO RS2323.3V TTL Logic level converter Operating Voltage : DC 3.3V Logic level : 3.3V LvTTL Logic level RS485 BUS IC : SP3485 Read and write automatic control IC :SM74HC04 7x 2.54MM pin Does not include pin ,mini size. Size : 17.9x11.7x2.8mm very small Weight :Only 0.7g Very light Application RS485 Temperature and humidity sensor PTZ camera LED controller MODBUS RTU RS485 Relay 485 [...]
47.04 $ Add to cartT-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Introduce: T-Beam V1.1 SX1262 IPEX NEO-M8N GNSS Version, change GPS / LoRa chip and LoRa antenna based on T-Beam V1.1. LoRa chip using Semtech SX1262 LoRa RF transceiver chip design, works in the 868/915MHz ISM frequency band, integrates a highly stable TCXO 32MHz crystal oscillator, half-duplex transceiver module, power up to +22dBm, to -139dBm receiving sensitivity. The LoRa antenna interface is changed from SMA to IPEX , which is more convenient to store. GPS chip using Semtech NEO-M8N GNSS chip design, also support GPS Beidou GLONASS, stronger positioning signal, The [...]
124.33 $ Add to cart4295 Description This antenna is a dual-frequency antenna. I use it on my WiFi deauther OLED application. I find ESP8266 Mini D1+antenna works much better than ESP-12E/F. So I decide to use ESP-07+this antenna for all my projects. Product specifications 4900~5900MHz S.W.R.:<=1.8 Antenna Gain: 8dbi Radiation: Omnidirectional antenna Polarization: Linear Impedance:50R PCB size: 95mm13.5mm0.55mm Wire distance: 15cm Connector: IPEX Packing List: 1Pc IPEX 8dBi Antenna for ESP8266 Mini D1 [...]
42.18 $ Add to cartADAU1701/1401 is a complete single-chip audio system with built-in control interfaces for 28 / 56-bit audio DSP, ADC, DAC, and similar microcontrollers. Signal processing technologies including equalization, crossover, bass enhancement, multi-band dynamic processing, delay compensation, speaker compensation, and stereo image widening can be used to make up for the practical limitations of speakers, amplifiers, and listening environments, thereby significantly improving the sound quality experience. This signal processing technology is comparable to that used in high-end studio equipment. Most processing is done in full 56-bit double-precision mode, resulting in excellent low-level signal performance. The ADAU1401 is a fully programmable DSP. With [...]
71.96 $ Add to cartFeature:OOTDTY 1.Support Lead-acid battery and Acting Battery,voltage range:6V~60V;2.Can display voltage,percent of battery,charging for TIME at the same for TIME through LCD3.The function is very powerful,realizes the automatic charge control,the control charge for TIME, also may set up and uploads the corresponding parameter through the serial portSpecifications: Product Model:XY-L10AControl accuracy:0.1VOutput Type: Direct OutputVoltage error:±0.1VScope of application: various lithium Charge control function:By setting the volt-HI:‘UP’ the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed [...]
46.64 $ Add to cartDescription: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. [...]
40.70 $ Add to cartDC-DC 9V/12V/24V to 5V Step Down Charger Power Module 3A Output USB Car Charging Regulator Buck Voltage Board Descriptions: A switching step-down DC-DC converter module; Fixed switching frequency 150KHz, the chip has excellent linearity adjustment and load regulation, fixed output 5V. The chip integrates reliability modules such as overcurrent protection, overtemperature protection, and short circuit shutdown. Specifications: Input: 5V-36V Output: 5V/3A Conversion Efficiency: 96 Switching Frequency: 150KHz Working Temperature: -40°C-+85°C Load Capacity: Maximum Output 3A, Long-Term Work 2A Product Size: 38 X 16 X 5mm/1.5 X 0.63 X [...]
40.71 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.