Additional information
Brand Name | becornce |
---|---|
Origin | Mainland China |
Certification | NONE |
Shell material | aluminum |
Rated power | 1000W |
Rated voltage | 110 - 220V |
Rated frequency | 50 - 60Hz |
Control speed | 32000r / min |
Chuck diameter | 6.35mm |
Internetowy sklep tanio
64.51 $
6 in stock
Brand Name | becornce |
---|---|
Origin | Mainland China |
Certification | NONE |
Shell material | aluminum |
Rated power | 1000W |
Rated voltage | 110 - 220V |
Rated frequency | 50 - 60Hz |
Control speed | 32000r / min |
Chuck diameter | 6.35mm |
Features:
★Transparent tail cover design
It is easy to observe, and the processing of silica gel is more accurate.
★Transparent bottom plate
The bottom plate adopts high-strength transparent bottom plate, which is not only light and stable, but also durable and durable
★One-button toggle switch
Flick the switch for more convenient use
★Copper motor
Thickened copper wire all-copper motor, the output is greatly improved, high temperature resistance, more effective to adapt to various intensity operations, not easy to burn
★Efficient heat dissipation and dust prevention system
Efficient ventilation, dust-proof heat dissipation, long-time work, fast heat dissipation
★Ruler card slot design
Fixed height, the base is more stable without moving up and down
★
Aluminum case
With scale design to adjust the height of different bottom plates,
effectively control the lifting of the base
Specifications:
Shell material: aluminum
Rated power: 1000W
Rated voltage: 110-220V
Rated frequency: 50-60Hz
Control speed: 30000r/min
Chuck diameter: 6.35mm
Motor material: high temperature resistant copper motor
Net weight: 1500g
Package Included:
1x linear guide
1x trimming guide wheel
2x wrenches
1x gasket
1x screw
Other Accessories
Note:
1. Please allow 0.5-1cm differences due to manual measurement.
2. Due to the light and screen difference, the item's color may be slightly different from the pictures.
Specification Volatage:AC220V Rated frequency:50-60HZ Motor speed: 30000r/min Trimming diameter: 6.35mm Weight:About 1.5kg Features: - With transparent base, the processing work can be viewed clearly. - Adopts all-copper motor with strong power, it has more stable performance. - External carbon brush design is convenient for replacement. - The height of base height can be adjusted to meet different needs. - Lightweight with wired design, convenient for daily operation and carrying. - Suitable for wood cutting, trimming, slotting and making holes. - Can be used for wooden processing, cabinet processing, handicraft production. - Equipped with a carrying case for easy storage [...]
104.39 $ Add to cartFeatures:Efficient & practical electric trimmer, the all-copper motor can hold high temperature and generate less heat to prolong the service time.Widely applicable, suitable for woodworking such as trimming, deflashing, slotting, notching, carving, etc.Flexible and simple operation, can cut a variety of trimming shape like square groove, round bottom groove, V groove, round edge, bevel edge, etc. To meet your different requirement.With transparent and adjustable base, the cutting track can be observed directly to achieve the accuracy and convenience of the operation.All-copper motor with 30000 rpm non-load speed can provide great power to meet the toughest woodworking house body, [...]
76.73 $ Add to cartPlease be kindly noted ,the listed product is produced and distributed abroad and subject to the laws of its country of origin。 The pneumatic handheld Chamfering Machine is designed for deburring straight edges and contours. Its lightweight and ergonomic structure makes it easy to use. Features: Mini size design allows for easy operation. It can be easily used with single hand. Adopts triangular tungsten steel blade, which is sharp, tough and durable. The chamfer size can be adjusted by selecting the scale from 0.1mm to 0.9mm. Metal pressure switch with safety buckle ensures safe use. No-load speed [...]
115.54 $ Add to cartFeatures: 1.All copper motor, strong power, low heat 2.Aluminum body case, durable, waterproof and dustproof 3.Covered rubber handle, comfortable to hold and easy to operate 4.Transparent base, clear operation, precise control 5.Steel chuck, tighter clamping and easy replacement 6.One-touch toggle switch for easy opening and closing Specifications: Color: BLUE Material: Aluminum + Plastic Input Power: 880W No Load Speed: 30000r/min Collet Diameter: 6.35mm1/4 Package Included: 1 x Wood Electric TrimmerWithout battery Suitable for Makita 18V battery Notice: 1. Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering.2. Please understand that [...]
118.76 $ Add to cartFeatures: 1. Woodworking trimmer Tool. Suitable household wooden door processing, furniture factory, handicraft processing, DIY working. 2. Using a powerful motor, powerful and durable. Aluminum shell, durable, and dustproof. 3.Fast speed and high efficiency, 33000r/min. 4. Transparent cover to observe the processing conditions. 5. One key for power on/off. 6. Apply to wood, plastic sheeting, wood veneer, and other similar materials chamfering, grooving, surface finishing, curve cutting, planing wood edge, pattern processing operations activities. Specifications: Name: Electric Wood Trimmer Tool Color: Red Material: ABS Plastic Voltage: 110V/220V Power: 2300W Frequency: 50/60Hz Speed: 33000rpm Package Size: 23.5 x 13 x [...]
61.58 $ Add to cartWoodworking Trimming Machine Flip Board Made of aluminum alloy countertop and plastic router insert ring, not easy to rust, suitable for long term use. Shaft Sleeve Size Shaft sleeve material: brass Sleeve size: Easy to adjust, threaded hex wrench in every corner to help you level and easily adjust the roadside plug-in. Flip Board Size Flip board material: aluminum alloy 6061 Flip board size: 235 x 120 x 9mm Convenient center hole bushing for aligning the router to the center of the drill hole. It is easy to use and makes the job work very well. Convenient Center Hole [...]
93.93 $ Add to cartThis is a multifunctional trim router, easy to operate and practical, wide application, more labor-saving, long service life.Features: Efficient & practical electric trimmer, the all-copper motor can hold high temperature and generate less heat to prolong the service time.Widely applicable, suitable for woodworking such as trimming, deflashing, slotting, notching, carving, etc.Flexible and simple operation, can cut a variety of trimming shape like square groove, round bottom groove, V groove, round edge, bevel edge, etc. To meet your different requirement.With transparent and adjustable base, the cutting track can be observed directly to achieve the accuracy and convenience of the operation.All-copper [...]
69.11 $ Add to cartSpecifications: Power Supply: Battery Compatible Battery:for Makita 18V Battery Motor:Brushless Motor Variable Speed:6 Speeds Material: Aluminum, Metal Chuck Diameter: 6.35 mm / 1/4 Rated Power: 1000W No Load Speed: 30000 r / min Frequency: 50 Hz Features: Aluminum base and motor housing Standard 1/4 inch collet accepts most router bits. Cutting depth adjusts easily for accurate cuts. 6-speeds can be adjust,easy to control. For home woodworking remodeling projects, roundovers and flush trimming. Package includes: 1 x Electric Wood Trimmer without Battery 2 x Wrenches 1 x Screw 1 x Trimmer Guide Assembly 1 x Straight Guide [...]
99.33 $ Add to cartSpecifications: Material: Aluminum + Plastic Plug:AU plug Size: Approx. Voltage: 220V Input Power: 800W No Load Speed: 30000r/min Frequency: 50HZ Collet Diameter: 6.35mm1/4 Features: Can be used for wooden processing, cabinet processing, handicraft production and DIY. Easy to wood trimming, grooving and drilling Transparent base, processing accuracy easily recognizable External carbon brush, universal carbon brush easy to replace The scale is clearly visible, easy to operate Lift knob, the knife scale can be adjusted Dressing guide, roller running along the curve,ensuring cutting is exact. Curve processing fine Straight guide, thicker models are stable and not deformed. Straight processing [...]
71.24 $ Add to cartClick picture to get this type base Details: - Suitable for machine 65mm type.- Adjustable, tool-free steel motor cam lock makes depth adjustment and base changes quick and solid-locking- Precision machined Aluminum bushings and case-hardened steel guide rods provide a smooth and accurate plunge stroke- Rubber overmolded handles and low center of gravity design provide best-in-class comfort, balance, and control- Heavy-duty, precision machined, die-cast aluminum base and motor housing [...]
78.26 $ Add to cartChcę coś kupić ale szukam informacji jak zamówić... |
Kupiłem coś ale chcę poznać status zamówienia... |
Odebrałem paczkę ale mam pytanie lub problem... |
Chcę dokonać zwrotu i potrzebuję informacji... |
Droptech Sp. z o.o. droptech.polska@gmail.com |
ul. Łódzka 118, Piotrków Tryb. Sprzedajemy tylko przez internet |
NIP: 7712911090 REGON 386758083 |
Wysyłka bezpośrednio od producenta lub dostawcy |
DARMOWA WYSYŁKA + ubezpiecznie dostawy + śledzenie przesyłki |
CAŁKOWITY ZWROT podczas reklamacji |
Reviews
There are no reviews yet.