Circuits
Showing 1–60 of 120 results
-
Sale!
9V/12V/24V to 5V 3A CAR USB Charger Module DC-DC Step Down Car Charging Converter 3A Output 12v 5v power supply module Pcb Board
DC-DC 9V/12V/24V to 5V Step Down Charger Power Module 3A Output USB Car Charging Regulator Buck Voltage Board Descriptions: A switching step-down DC-DC converter module; Fixed switching frequency 150KHz, the chip has excellent linearity adjustment and load regulation, fixed output 5V. The chip integrates reliability modules such as overcurrent protection, overtemperature protection, and short circuit shutdown. Specifications: Input: 5V-36V Output: 5V/3A Conversion Efficiency: 96 Switching Frequency: 150KHz Working Temperature: -40°C-+85°C Load Capacity: Maximum Output 3A, Long-Term Work 2A Product Size: 38 X 16 X 5mm/1.5 X 0.63 X [...]
40.71 $ Add to cart -
Sale!
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V
HW-882 2S 3A 18650 Li-ion Lithium Battery Charger Protection Board BMS Module 7.4V 8.4V Feature: 2S 7.4V/8.4V 18650 lithium battery protection board, suitable for protecting two rechargeable li-ion/lithium polymer batteries in series from overcharge and overdischarge. Specification: Charging voltage: 8.4V-9V Maximum working current: 3A Maximum instantaneous current: 5A Quiescent current: less than 3uA Internal resistance: less than 45mΩ Over-discharge voltage range: 2.3-3.0V ±0.05V Overcharge voltage range: 4.25-4.35V ±0.05V Short circuit protection: it can be protected and needs to be recharged Product size: 36 x 6 x 2mm Product weight: 3g Packing size: 50 x [...]
40.59 $ Add to cart -
Sale!
LILYGO® TTGO T-Display ESP32 Development Board WiFi Bluetooth 1.14 Inch ST7789V IPS LCD Wireless Controller Module For Arduino
55.25 $ Add to cart -
Sale!
100% tetsted Work and Equipment Power Support Board BN44-00787A Samsung L58GFB ESM for Ua58j50swajxxz/ua58h5288aj
84.03 $ Add to cart -
Sale!
HDD PCB st desktop hard disk 3.5 circuit board No.: 100291893
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
61.24 $ Add to cart -
Sale!
LILYGO® TTGO T-Display ESP32 Development Board WiFi Bluetooth 1.14 Inch ST7789V IPS LCD Wireless Controller Module For Arduino
59.78 $ Add to cart -
Sale!
YAOGREENHAM jumbospot V1.3 MMDVM_HS_Dual_Hat Duplex Hotspot Board kit With USB Port Support P25 DMR YSF NXDN For Raspberry pi
New arrival :If you want to buy the finished MMDVM hotspot power bank ,please click this link The default bit error rate is less than 5, and the default offset is 0. If the bit error rate is more than 5, as long as the signal can be received, it can be corrected by offset. 1.Latest version V1.3, and the firmware is latest 2. original cystal : Original from USA Duplex variant of MMDVM_HS_Hat This PCB uses the MMDVM_HS . It has two ADF7021 onboard and allows for duplex operation with two [...]
85.70 $ Add to cart -
Sale!
WD Digital desktop hard disk PCB 2060 800068 001 Rev P1 measured NEW
most hdd boards have the unique biosrom or nvram chip which includes the unique data to access the hdd system area. if the bios information is not compatible with your hdd, there is no way to read the hdds data. because of this, we should use the original pcbs bios when we swap pcb. bios chip swapping is a must. before you purchase, please read: 1 this is just a pcb printed circuit boards, not the whole hard drive; 2 pcb board number is printed on the board, not on the sticker; 3 these boards are used, not brand [...]
64.20 $ Add to cart -
Sale!
Motor Speed Controller Module Adjustable Voltage Regulator Adjustable Speed Regulator Control Governor Switch
U.S. buyer attention: The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military address. Spanish buyers attention: if your address includes following postal code please do not choose the Spanish warehouse. The zip code starts with 35/38. Overseas warehouse cannot be delivered. 5A 90W PWM Motor Speed Controller Module DC 5V-35V Adjustable Voltage Regulator Governor Switch Specification: Working Voltage: DC 5V-35V Output Current: 0-5A Output Power: 90W Large Quiescent Current: 7μA Standby State PWM Duty Cycle: 1-100 PWM [...]
40.79 $ Add to cart -
Sale!
DC-DC SX1308 2A Step-UP Power Module 2-24V to 2-28V Boost Adjustable Converter
DC-DC 2-24V to 2-28V Step-UP Power Module SX1308 2A Adjustable Voltage Boost Converter Board Features: Oscillation frequency 1.2MHz, efficiency is as high as 95 Circuit has short circuit protection, overheating protection function. 10k to adjust potentiometer, adjust the output voltage. Description: 1: VIN cathode voltage input 2: GND anode voltage input 3: GND anode voltage input 4: OUT cathode voltage output, the 2 GNDs are intercommunicated, and the pads of the four voltage input/output terminals are 4mm x 4mm pads, and the through hole diameter is 1mm. 5: 10K adjust potentiometer, choose the output voltage [...]
40.46 $ Add to cart -
Sale!
2P Pin Type Busbar 4-12 Way Copper Bar Terminal Block for MCB DZ47 Air Switch Connector 2P63A Circuit Breaker Connector
Product name: 2P 63A bus bar 4-12 teethActual specifications: 1.4 thick x 6.6mm wide manual cutting, width plus or minus 0.2mm, tooth width 5.5mm.Product spacing: A phase-A phase spacing 36mm.Product description: Thickness of copper pieces x width of horizontal row width refers to the width of horizontal row of copper pieces, not the width of teeth.Product material: red copper primary color.Product insulation: PVC flame retardant plastic.Scope of use: It can be connected to C45 type, DZ47 type, IC65N type and other miniature circuit breaker air switches specifically depends on the circuit breaker phase spacing, it is not recommended to [...]
43.26 $ Add to cart -
Sale!
TDA2822M Digital Power Amplifier Board 2×1.5W TDA2822M Digital Power Amplifier Board 2-Channel Power Amp Module
TDA2822M Digital Power Amplifier Board 2x1.5W 2.0-Channel Stereo Audio Power Amp Module Specification: Rating: 1W x 2 1-3 inch speaker Mximum power: 1.5 W x 2 0.2-5 W can meet the speakers Speaker impedance: 4-32 Ω Power amplifier ratio: ≥50 db Distortion: 0.1 Input interface: 3 p wiring jokes Adjust the form: volume adjustment Input voltage: DC 1.8-12V Product size: 63 x 29 x 23mm/2.48 x 1.14 x 0.91 Product weight: 25g Packing size: 100 x 50 x 30mm/3.94 x 1.97 x 1.18 Gross weight: 25g Instructions for use: 1. Connect the speakers The speakers at both ends of [...]
41.59 $ Add to cart -
Sale!
2S-6S B6 B8 A6 Lithium Battery Balanced Charger Expansion JST XH Adapter Board
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X [...]
41.34 $ Add to cart -
Sale!
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. 1 X Battery [...]
41.14 $ Add to cart -
Sale!
9V/12V/24V to 5V DC-DC Step Down Car Charging Car Charger 3A Output USB Charger Module Diy Electronic Diy Kit Pcb Board
DC-DC 9V/12V/24V to 5V Step Down Charger Power Module 3A Output USB Car Charging Regulator Buck Voltage Board Descriptions: A switching step-down DC-DC converter module; Fixed switching frequency 150KHz, the chip has excellent linearity adjustment and load regulation, fixed output 5V. The chip integrates reliability modules such as overcurrent protection, overtemperature protection, and short circuit shutdown. Specifications: Input: 5V-36V Output: 5V/3A Conversion Efficiency: 96 Switching Frequency: 150KHz Working Temperature: -40°C-+85°C Load Capacity: Maximum Output 3A, Long-Term Work 2A Product Size: 38 X 16 X 5mm/1.5 X 0.63 X [...]
40.71 $ Add to cart -
Sale!
2.4G 5.8G Dual Band Wireless Router WIFI Network Card IPEX PCB Built-In 5DBi High Gain Antenna
4295 Description This antenna is a dual-frequency antenna. I use it on my WiFi deauther OLED application. I find ESP8266 Mini D1+antenna works much better than ESP-12E/F. So I decide to use ESP-07+this antenna for all my projects. Product specifications 4900~5900MHz S.W.R.:<=1.8 Antenna Gain: 8dbi Radiation: Omnidirectional antenna Polarization: Linear Impedance:50R PCB size: 95mm13.5mm0.55mm Wire distance: 15cm Connector: IPEX Packing List: 1Pc IPEX 8dBi Antenna for ESP8266 Mini D1 [...]
42.18 $ Add to cart -
Sale!
DC-DC Step-UP Power Module 2-24V to 2-28V SX1308 Voltage Boost Adjustable Board
DC-DC 2-24V to 2-28V Step-UP Power Module SX1308 2A Adjustable Voltage Boost Converter Board Features: Oscillation frequency 1.2MHz, efficiency is as high as 95 Circuit has short circuit protection, overheating protection function. 10k to adjust potentiometer, adjust the output voltage. Description: 1: VIN cathode voltage input 2: GND anode voltage input 3: GND anode voltage input 4: OUT cathode voltage output, the 2 GNDs are intercommunicated, and the pads of the four voltage input/output terminals are 4mm x 4mm pads, and the through hole diameter is 1mm. 5: 10K adjust potentiometer, choose the output voltage [...]
40.46 $ Add to cart -
Sale!
3D Printer Parts Suitable For 3D Printer Sidewinders X1 X2 And Pro USB Adapter Board 3D Printer Parts Accessories
Description: This Motherboard Adapter Board is especially for Sidewinders X1 X2 Pro. It is an accessory for 3D printers and is a good choice if your printer happens to be missing it.Specification: Name: Motherboard Adapter BoardWeight: about 10gPackage size: about 8 x 8 x 1cm/3.1 x 3.1 x 0.4in packed in a transparent bagApplicable models: For Sidewinders X1/X2//ProPacking List: Rattlesnake x 1Motherboard adapter board x 1Note: Due to the lighting effects and shooting angles, there is a color difference in the product, please understand.Due to manual measurement, there is [...]
44.73 $ Add to cart -
Sale!
Air Compressor Pressure Valve Switch Manifold Relief Regulator Gauges 90-120PSI 230-220V Aluminum alloy bracket
Aluminum alloy Air Compressor Pressure Valve Switch Manifold Relief Regulator Gauges 125 PSI 230 Durable and practical. Easy to install and remove.The main function of the clique is to adjust the air compressor to close and start the pressure.Users can adjust according to their actual situation.The air regulator on both sides of the copper is an exhaust clique that opens the gas when used.Right red is the safety aluminum, plasticColor: as shownRated voltage: 220vExhaust pipe: about 6MMBracket joint size: about 20MMOuter pressure relief port: about 9.5MMMaximum current: 20AWorking pressure: 5-8KG 90-120 PSISwitching pressure range: 0.5-0.8MPA 5-8BAR 90-120PSImethod: normally closedSize: [...]
67.91 $ Add to cart -
Sale!
6V 12V 6A PWM No-Polarity DC Motor Speed Governor High Power Speed Controller
DC 6V 12V 6A PWM No-Polarity Motor Speed Controller Module High Power Motor Speed Regulator Governor Control Switch Feature: 1. High-quality speed control switch, with switch DC speed controller; 2. DC 6-12V input working voltage; 3. 6A stable working current; 4. The speed adjustment range is 0-100 of the original speed; Specification: Product size: 51 x 37 x 26mm/2.01 x 1.46 x 1.02 Notice: 1. The input of the DC motor speed controller is direct current, and it cannot be directly connected to alternating [...]
41.30 $ Add to cart -
Sale!
5pcs Mini360 RC Airplane Module Mini 360 DC Buck Converter 2A Step Down 4.75V-23V to 1V-17V 17x11x3.8mm LM2596
Small volume DC-DC synchronous rectifier step-down module Application fields: DIY mobile power supply, vehicle power supply, communication equipment power supply, various occasions with strict requirements on volume and weight such as aviation model, etc.. Technical parameters: Model name Mini360 Ultra small volume DC-DC synchronous rectifier step-down module Module properties Non isolated Depressurization Rectification mode Synchronous rectification input voltage 4.75V-23V output voltage 1.0V-17V Output current Peak 3a, long time 1.8A conversion efficiency 96 high switching frequency 340KHz Output ripple 30mV when no load Load adjustment rate ± 0.5 Voltage adjustment rate± 2.5 working temperature-40 ° C to +85 ° C [...]
43.50 $ Add to cart -
Sale!
10A 6-60V Battery Charger Control Module Overcharge for PROTECTION Control Switc
Feature:OOTDTY 1.Support Lead-acid battery and Acting Battery,voltage range:6V~60V;2.Can display voltage,percent of battery,charging for TIME at the same for TIME through LCD3.The function is very powerful,realizes the automatic charge control,the control charge for TIME, also may set up and uploads the corresponding parameter through the serial portSpecifications: Product Model:XY-L10AControl accuracy:0.1VOutput Type: Direct OutputVoltage error:±0.1VScope of application: various lithium Charge control function:By setting the volt-HI:‘UP’ the battery voltage is below the volt-LI:’dn’,the relay leads,the charger begins to charge the battery;when the battery voltage is up to volt-HI:’UP’,the relay is diconnected and the automatic charge is completed [...]
46.64 $ Add to cart -
Sale!
8 Decade Resistor Board 0.1R-9999999R Programmable Resistor Resistance Board Module 1/2W 1% 8pcs Jumper Caps 0.1-9999999MΩ
Programmable Eight Decade Resistor Board 1R-9999999R Step Accuracy 0.1R 1/2 Watt SMD Resistance Module Description: This is resistance substitution box good low-cost alternative solution with good accuracy, wide range and 0.1R step accuracy. for educational experiments, electronic engineering design or test trimming are excellent applications. Can flexible and quick setting resistance range from 1R to 9999999R or 0.1-9.9999999MR 0-10MS . Feature: Design based on resistors series theorem. 1/2 watt tolerance +/-1 SMD resistors. High quality FR4 glass fiber PCB. With spare parts 8 pieces jumper caps Specification: Programmable Resistance: 0 to 9,999,999 ohm, [...]
42.54 $ Add to cart -
Yubico Security Key NFC – Two Factor Authentication USB And
We offer competitive price,reliable shipping and better communication service.If you need the datasheet for this product,please leave a message. Welcome to send your request if we don't have in our store. Yubico Security Key NFC - Two Factor Authentication USB and NFC Security Key, Fits USB-A Ports and Works with Supported NFC Mobile Devices – FIDO U2F and FIDO2 Certified - More Than a Password. Item Description SECURITY KEY: Protect your online accounts against unauthorized access by using 2 factor authentication with the Yubico Security Key NFC. It's the world's most protective USB and NFC security key that works with [...]
150.75 $ Add to cart -
Sale!
TP5100 Double Single Lithium Battery Charge Management Compatible 2A Rechargeable Llate 18650 4.2V 8.4V Built-in power MOSFET
Description: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The trickle precharging current [...]
40.65 $ Add to cart -
Sale!
1PC Audio Speaker Protection Board Boot Delay DC Protect Kit DIY Double Channel delay of 3-5 seconds
Dimension Long 65mmx wide 40mmx 25mm high Features The circuit is simple,safe and reliable. Operating voltage AC 12-16V, suggest to use an independent power supply for it. Sampling delay of 3-5 seconds of 1.2V DC Sampling 3-5 seconds delay. Package included 1 x Speaker protection board DIY Components kit for Stereo This products include all components and PCB as the [...]
45.05 $ Add to cart -
Sale!
5pcs TP4056 Lithium Battery Charger Module DIY Board with Type-C Feame Interface
Feature: Charge protection, prevent the battery overcharge and overdischarge, and automatically control the charging current, better protect the battery. Type-C female base interface, reserved with input voltage welding electricity, convenient for DIY. Specification: Input voltage: 4.5V-5V Maximum charging current: 1000mA Charging cut-off voltage: 4.2V+-1 Battery overdischarge protection voltage: 2.5V /3A Board size: 2.8cm x 1.7cm/1.1 x 0.66 Package weight: 3g Operation Manual: 1. Type-c female base and the power input end of + ~ welding pad position next to it, connect to 5V input voltage. 2. B+ is connected to the positive electrode of [...]
41.56 $ Add to cart -
Sale!
Trigger Switch Board MOS Field Effect Transistor 3V 5V 12V 24V 36V Transistor Switch Module Automation Circuit
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add a heat sink, [...]
40.90 $ Add to cart -
Sale!
NE555+CD4017 Running LED Flow LED Light Electronic Production Suite DIY Kit
Description: Board size. 53mm x 19mm Supply Voltage :2.5 - 14 .5 V This package is mainly decimal counter circuit and circuit generated by the clock , from the core of the self-excited NE555 multivibrator power through R2, R3, R4 charge the capacitor C1, C1 started when charging , NE555 2 feet still in low, so the output pin 3 goes high when power through R2, R3, R4 to charge C1 to 2/3 of the supply voltage , the output pin 3 level from high to low , NE555 conducting internal discharge , capacitor C1 through R4, R3, NE555 [...]
41.40 $ Add to cart -
Sale!
Field Effect Transistor Switch Module Trigger Switch Module PMOS Field Effect Transistor 3V 5V 12V 24V 36V
U.S. buyer attention: The areas where the US warehouse does not deliver goods are: Hawaii, Alaska, Puerto Rico, Guam and other US overseas territories. And the military address. Spanish buyers attention: if your address includes following postal code please do not choose the Spanish warehouse. The zip code starts with 35/38. Overseas warehouse cannot be delivered. F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital [...]
40.90 $ Add to cart -
Sale!
TDA2822M Mini 2.0 Channel 1W*2 Stereo Audio Power Amplifier Board DC 5V 12V CAR sound Amplifiers module
TDA2822M Digital Power Amplifier Board 2x1.5W 2.0-Channel Stereo Audio Power Amp Module Specification: Rating: 1W x 2 1-3 inch speaker Mximum power: 1.5 W x 2 0.2-5 W can meet the speakers Speaker impedance: 4-32 Ω Power amplifier ratio: ≥50 db Distortion: 0.1 Input interface: 3 p wiring jokes Adjust the form: volume adjustment Input voltage: DC 1.8-12V Product size: 63 x 29 x 23mm/2.48 x 1.14 x 0.91 Product weight: 25g Packing size: 100 x 50 x 30mm/3.94 x 1.97 x 1.18 Gross weight: 25g Instructions for use: 1. Connect the speakers The [...]
41.56 $ Add to cart -
Sale!
Governor Switch Motor Speed Controller Board Speed Controller Module Adjustable Voltage Regulator Governor Switch
5A 90W PWM Motor Speed Controller Module DC 5V-35V Adjustable Voltage Regulator Governor Switch Specification: Working Voltage: DC 5V-35V Output Current: 0-5A Output Power: 90W Large Quiescent Current: 7μA Standby State PWM Duty Cycle: 1-100 PWM Frequency: 20KHz Product Size: 50 X 30 X 15mm/1.97 X 1.18 X 0.59 Note: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3mm measuring deviation due [...]
40.80 $ Add to cart -
Sale!
5pcs 3A MINI DC-DC STEP DOWN CONVERTER VOLT REGULATOR 5V-23V TO 3.3V 6V 9V 12V 340KHz
5pcs 3A MINI DC-DC STEP DOWN CONVERTER VOLT REGULATOR 5V-23V TO 3.3V 6V 9V 12V 340KHz Specification: Size: 17 x 11 x 3.8mm Color: multicolor Material: electronic components Input voltage: 4.75V-23V Output voltage: 1V-17V Output current: 3A peak, 1.8A for long time Transfer efficiency: 96 MAX. Switching freqnency: 340KHz Output ripple: 30mV no-load Load regulation: ±0.5 Voltage regulation: ±2.5 Working temperature: -40~85℃ Package list: 1/5/10 x DC -DC power supply module Features: 1. Efficiency: Up to 96 depends on the difference between input and output voltage This module uses synchronous rectification, efficient power conversion available. 2. Good performance: Use [...]
43.18 $ Add to cart -
Sale!
TTGO ESP32 LoRa 240Mhz Wireless Module WiFi BT Development Board 1.14 Inch LCD Control Board With T-Display for Arduino
94735 ESP Module TTGO T-Display ESP32 WiFi BT Module Development Board For Arduino 1.14 Inch LCD Control Board Development Board Features: 1. 32-bit low-power dual-core CPU for application processors Up to 240 MHz of main frequency 600 DMPS computing power. 2. Built-in 520 kb SRAM, 4 meters external psram. 3. Supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC. 4. Support ov 2640 and ov 767 cameras, built-in flash wifi image support up TF card support. 5. Multi-mode support Pink lwip and freedos integrated sta [...]
72.63 $ Add to cart -
Sale!
2S-6S B6 B8 A6 Lithium Battery Balanced Charger Expansion JST XH Adapter Board
2S-6S Lithium Battery Balanced Charger Expansion JST XH Adapter Board for MEGA Power 860 960 RC Lipo Battery Charging Specification: JST XH Balance Charging Adapter 6S Expansion Board Support 2S-6S lithium battery Suitable for MEGA Power 860 and 960 chargers Dimensions: 60 x 25 x 15mm Note: Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! Please allow 1-2cm measuring deviation due to manual measurement. [...]
41.34 $ Add to cart -
Sale!
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Switch Board Accessories
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add a [...]
40.96 $ Add to cart -
Sale!
Wireless Bluetooth-compatible 4.2 Stereo Audio Transmitter Lossless Module HIFI DIY Modification wireless adapter
HW-425 Bluetooth-compatible Audio Receiver Module Bluetooth-compatible 4.2 Wireless HiFi Stereo Lossless MP3 Music Decoder cutouts and interfaces ensure that they fit perfectly in the installation location. Easy installation.Made of high-quality materials, corrosion-resistant, wear-resistant, durable and long service life.Professional chipset can provide excellent system performance.Low power consumption, support Bluetooth-compatible 4.2 transmission, two-channel stereo lossless playback. After the module is connected with Bluetooth, it can quickly sense the wireless transmission of Bluetooth, which is very easy to use.In an open space, the Bluetooth-compatible connection distance can reach up to 20 meters. It is widely used in various audio modifications, Bluetooth-compatible [...]
41.50 $ Add to cart -
Sale!
TP5100 2A Charging Board Power Module Single Dual Battery Charging Management
Description: 1. The TP5100 is a switching step-down dual section 8.4v/single section 4.2v lithium battery charging management chip. Its QFN16 subcompact package and simple peripheral circuits make the TP5100 ideal for high-current charging management applications in portable devices. 2. Meanwhile,TP5100 has built-in input overcurrent, undervoltage protection, chip overtemperature protection, short-circuit protection, battery temperature monitoring and battery reverse connection protection. 3. The TP5100 has a wide input voltage of 5v-18v, and the battery charging is divided into three stages: trickle precharging, constant current and constant voltage. The [...]
40.74 $ Add to cart -
Sale!
3.3V Wireless Socket Module Adapter Plate 8Pin 24L01 Smart Electronic Board
3.3V Wireless Socket Module Adapter Plate Board 8Pin 24L01 Smart Electronics Module Feature: The working voltage of wireless module is generally 3.3v, while that of 51 single-chip computer is 5V. This module is convenient for the cooperation between wireless module and 51 single-chip computer system board. Specification: Pin value: 8Pin Product size: 25 x 18 x 9mm/0.98 x 0.7 x 0.35 Product weight: 2g Note: Please allow 1-3mm differs due to manual measurement. Due to the different display and different light, the picture may not show the actual color of the item. Thanks [...]
41.63 $ Add to cart -
Sale!
4 Channel HDMI-compatible PCI-E Video Capture Card 1080p 60fps OBS Wirecast Live Broadcast Streaming Adapter for live streaming
346.09 $ Add to cart -
Sale!
DIY Bluetooth-compatible 5.0 Receiver Wireless Decoder Board Module 3.5mm Bluetooth Audio Receiver Portable Audio Circuits
Description: Product name: Bluetooth 5.0 audio receiver Product size: 30 x 30mm Packing size: 8 x 5 x 2cm Bluetooth version: V5.0 Product color: black, white Product weight: 6 grams Product parameters: Power interface: micro 5p reserved 2.5mm welding port, this model does not support battery power supply Input voltage: 3.7V-5V Signal to noise ratio: 90DB THD+N: -70DB Crosstalk: -86db DNR: 91db Transmission protocol: A2DP/AVCTP/AVDTP/HFP Transmission distance: about 10 meters the shorter the distance, the better the stability Output interface: 3.5mm stereo reserved welding points, you can DIY by yourself Specifications: Features: 1. Using Bluetooth 5.0 main control chip, good [...]
41.05 $ Add to cart -
Sale!
F5305s Pmos Pulse Trigger Switch Board Fet Mos Field Effect Transistor Switch Module 3v 5v 12v 24v 36v
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add a heat sink, [...]
40.98 $ Add to cart -
Sale!
5Pcs BL1830 Li-Ion Battery Charging Protection Circuit Board For Makita 18V 21V Power Tool BL1815 BL1860 LXT400 Bl1850
body { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
87.51 $ Add to cart -
Sale!
KSD301 250V 10A 95°C Normal Close NC Temperature Controlled Switch Thermostat
85774 Ratón y teclado KSD301 250V 10A 95 °C Cierre Normal NC temperatura controlada interruptor termostatoAltavoz OOTDTY Descripción:100 nuevo y de alta calidadAmpliamente utilizado para control de temperatura o protección de electrodomésticos eléctricos.Se cierra hasta que la superficie alcanza los 95 grados Celsius, luego el interruptor se abre.Propósito, reinicio automático, bajo costo, gran capacidad, termostatos de corriente electrodomésticos, PC, hornos de microondas, planchas, refrigeradores, horno electrónico, unidad de calefacción, café, calentador de agua, etc.Tipo de acción: Cierre Normal N.C.Temperatura de acción: 95 Â 250V 10AResistencia de circuito 50 MohmResistencia de aislamiento 100 MohmTamaño: 3,3x2,1 cm/1,3 pulgadas x 0,8 [...]
41.68 $ Add to cart -
Sale!
Gold-plated DIP8 Mono To Dual OP Amp Adapter Converter Socket For AD797 AD847 OPA128 Chips
Gold-plated DIP8 Mono To Dual OP Amp Adapter Converter Socket Description: This is Assembled product. 100 Brand new and High quality Mono To Dual OP Amp Adapter Socket Using Taiwan nextron DIP8P Gold plated IC socket High-grade gold-plated double-sided PCB, Gold-plated double-headed round needle Suitable for AD797 AD847 OPA627 OPA134 OPA604 NE5534 OPA128 etc. Packing List: 1pcs x Mono To [...]
43.83 $ Add to cart -
Sale!
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V to MCU IO port PLC
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A [...]
40.91 $ Add to cart -
Sale!
1pcs 360 Degrees Rotary Encoder Module Brick Sensor Switch Development KY-040
41.46 $ Add to cart -
Sale!
IP2368 Bidirectional 100W Fast Charging Module Buck-Boost Type-C Interface Lithium Battery Power Fast Charging Board
body { font-size: 75; color: #000; font-family: Open line-height: 1.3; } dl { margin: 0px; width: 480px; float: left; } dt { width: 100px; height: 15px; float: left; } dd { width: 240px; height: 15px; float: left; } dl dt { margin: 0px; line-height: 22px; color: #474747; font-size: 14px; font-family: tahoma; } #product-desc { width: 100; height: 209px; } #description { width: 100; height: 50; [...]
64.20 $ Add to cart -
Sale!
T-Impulse Wristband LoRa 868MHZ LoW Power Transceiver GPS OLED STM32 Programmable Watch S76G CXD5603GF GNSS Module
Compatible Audio & Video Equipment Style: Amplifier Model Number: T-Impulse Wristband MCU: S76G LoRa Frequency Band: LoRa 868MHZ T-Impulse S76G 868MHZ Bracelet: K133 Colour: black Material: plastic+metal Package Contents: 1 x T-Impulse S76G Bracelet 868MHZ 1 x TYPE-C Line Only the above package content, other products are not included. Note: Light shooting and different displays may cause the color of the item in the picture a little different from the [...]
99.50 $ Add to cart -
LILYGO® T-Display-S3 TF Shield Expansion Module Compatible With T-Display-S3 Series Basic Edition Touch Edition Shell Edition
49.68 $ Add to cart -
Sale!
5A 90W PWM Motor Speed Controller Module DC 5V-35V Adjustable Voltage Regulator Governor Switch Motor Speed Controller Board
5A 90W PWM Motor Speed Controller Module DC 5V-35V Adjustable Voltage Regulator Governor Switch Specification: Working Voltage: DC 5V-35V Output Current: 0-5A Output Power: 90W Large Quiescent Current: 7μA Standby State PWM Duty Cycle: 1-100 PWM Frequency: 20KHz Product Size: 50 X 30 X 15mm/1.97 X 1.18 X 0.59 Note: 1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you! 2. Please allow 1-3mm measuring deviation due to manual measurement. [...]
40.85 $ Add to cart -
Sale!
HW-425 Bluetooth-compatible Audio Receiver Module Bluetooth-compatible 4.2 Wireless HiFi Stereo Lossless MP3 Music Decoder Board
HW-425 Bluetooth-compatible Audio Receiver Module Bluetooth-compatible 4.2 Wireless HiFi Stereo Lossless MP3 Music Decoder Board Feature: Accurate cutouts and interfaces ensure that they fit perfectly in the installation location. Easy installation. Made of high-quality materials, corrosion-resistant, wear-resistant, durable and long service life. Professional chipset can provide excellent system performance. Low power consumption, support Bluetooth-compatible 4.2 transmission, two-channel stereo lossless playback. After the module is connected with Bluetooth, it can quickly sense the wireless transmission of Bluetooth, which is very easy to use. In an open space, the Bluetooth-compatible connection distance can reach up to 20 meters. It is [...]
41.00 $ Add to cart -
Sale!
RC Absorption Circuit Module Relay Contact Protection Resistance Surge Board
RC Absorption Circuit Module Relay Contact Protection Resistance Surge AC/DC 5V-400V Snubber Board Description: RC absorption circuit is also called RC Snubber circuit. It is a circuit structure in which resistors and capacitors are connected in series and connected in parallel with switching devices. It is used to improve the voltage and current waveforms of electronic power devices when they are turned on and off. The RC absorption circuit module can prevent the induced electromotive force generated at the moment of turning on and off of the inductive load from causing damage to the switching devices such as relays [...]
40.50 $ Add to cart -
Sale!
6V 12V 24V DC Car Truck Voltage Circuit Tester Digital Display Long Probe Pen Light Bulb Automobile Diagnostic Tools Auto Repair
6V 12V 24V DC Car Truck Voltage Circuit Tester Digital Display Long Probe Pen Light Bulb Automobile Diagn Dear friend, due to different arrival batches, the metal parts are white and black. Those who care should buy carefully. Product Description:This probe pen is ideal for checking circuits, fuses, switches and wiring on automobiles, trailers, boats, motorcycles and other low voltage systems. Connect the alligator clamp to the ground, then take the probe to test circuit. If the indicator light is on, there is is made of plastic and the hardened & tempered carbon steel probe is chrome [...]
50.93 $ Add to cart -
Sale!
YX-Q01 220V Two-Way Power Automatic Switcher 10A 2 Power Supply 2 In 1 Out Power Failure Conversion Switch Board Module
85-240V 10A Dual AC Power Supply Automatic Switching Controller Module Board for dual AC power automatic switching module. The module can automatically switch between the two power sources.Feature:1. AC power2. Dual power input3. Automatic power switch4. Main power YX-Q01Main power supply voltage: 85V~240V ACBackup power supply voltage: 85V~240V ACLoad current: 10A MAXWorking temperature: -25℃~+85℃Working humidity: 5~95 RHSize: 70 x 48 x 18.5mmTip:1. When the main power supply is out of power, the module automatically switches to the backup power supply; when the main power supply is restored, the module automatically switches to the main power supply.2. At [...]
47.26 $ Add to cart -
Sale!
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Switch Board Accessories
F5305S PMOS Pulse Trigger Switch Board FET MOS Field Effect Transistor Switch Module 3V 5V 12V 24V 36V Feature: 1. Field effect transistor switch module, input and output are completely isolated. 2. Signal trigger terminal: digital high and low level. Can be connected to MCU IO port, PLC interface, DC power supply, etc., 3. Input signal voltage: 3V~24V; current: about 5mA. 4. The output terminal can control high-power equipment, motors, bulbs, LED strips, DC motors, micro water pumps, solenoid valves, etc. 5. Output controlled voltage: 5V~36V. Current: less than 5A, more than 5A need to add [...]
40.93 $ Add to cart -
Sale!
A-BF Infrared Thermal Imager RX-350 PCB Circuit Floor Heating Pipe Electronic Detection HD Handheld Thermal Imaging Camera
276.61 $ Add to cart -
Sale!
Original 6870C-0266A placa de video Logic Board kit for / 32LH30RC-TA LC320WUN Connect with T-CON Connect Board
If you are not sure about the model of the board, please send us a clear picture of the original board. Have a nice day!!Welcome to my store,Please contact me if you meet any question,I will try my best to satisfy you. We specialized in T-con board and other electronic products. We have own factory and a large number of T-con boards to sell, please contact me what model you [...]
47.90 $ Add to cart -
ExcelValley – Mono Patch Cable Splitter – TS 3.5mm 1/8" – Modular Synth Eurorack
ExcelValley - Mono Patch Cable Splitter - TS 3.5mm 1/8 - Modular Synth Eurorack Mono Audio Multi Splitter Adapter A passive 1 into 5 multiplier in a star shape. Suitable for your Eurorack modular synthesizer, or other general patching duties, where a mono 3.5mm cable is needed. Features Connect up to 5 devices to one source device - 6 Ports, 5 Way Nickel plated connectors provide high corrosion protection 3.5 mm adapter splits line into five 3.5 mm ports 1 input / 5 outputs any socket can be used as input Compatible with: Roland, Moog, Doepfer, Arturia, Korg Specifications Color [...]
50.48 $ Add to cart -
Sale!
New CCPD-TC575-009 STCON575GS V1.0 T-Con Board For ONN 100069454 Vizio V585-H11 Ver: LTMDZILW HISENSE 58R6E3 T-CON LVDS BOARD
48.90 $ Add to cart